Selection and maintenance of SAIQ fan bearings

When we choose the SAIQ fan bearing model, we choose a fan working environment that is suitable for us. In use, it will also help users save a lot of resources, and play a full use effect in a large number of fan components. Bearings are more important, but many users always ignore many details in the selection and use of SAIQ bearings, which is why there are always problems in the use of bearings, but in fact we only choose from the most safe, but also Note that it protects the use of the fan from a two-pronged approach, let us take a look at the maintenance of SAIQ fan bearings.
The maintenance work of SAIQ fan bearings can not only be limited to adding lubricants. The quality and quantity of lubricants should also be controlled, the operating parameters of the lubrication system should be checked in detail, and the centerline of the shaft should be checked, mainly radial eccentricity and axial deviation. During the operation of the bearing, in accordance with the principle of "every 15 minutes, one hour, six hours, and hourly inspection", the SAIQ bearing temperature changes are checked to maintain the temperature of the bearing housing.
The lubrication management system of the fan is the most closely developed with the bearing, so we must pay attention to the effectiveness of the lubrication system when we maintain. When half of the ambient temperature exceeds 40°C, the heating interval should exceed 15°C of the bearing, and the lubrication interval should be shortened to the predetermined time interval. Exhaust gas temperature is too high, it is necessary to check the operating environment conditions and restore the normal temperature of exhaust gas. When there is too much lubricant in the SAIQ bearing, restore the appropriate amount of lubricant and check the working state of the throttle valve. According to some maintenance knowledge SAIQ fan bearing maintenance, bearing wear can be reduced, to a large extent, energy is also saved for users, and therefore for selection and maintenance of SAIQ bearings, it must be given fully and carefully.