Thrust roller bearings are used to support axial and radial combined loads, mainly axial loads, but the radial load must not exceed 55% of the axial load. Compared with other thrust roller bearings, this type of bearing has a lower friction coefficient, higher speed, and has self-aligning performance.

Angular contact ball bearings mainly bear large unidirectional axial loads. The larger the contact angle, the greater the load capacity. The material of the cage is steel plate, brass or engineering plastic, and the molding method is stamping or turning. It is selected according to the bearing type or the use conditions. Others include combined angular contact ball bearings, double row angular con

The cylindrical roller bearing adopts a tight fit between the inner diameter and the roll neck to withstand radial forces. It has the advantages of large load capacity, high limiting speed, high precision, separable inner and outer rings, interchangeable, easy processing, low production cost, and convenient installation and disassembly. ; Thrust bearing bears axial force. The specific structure ca

Tapered roller bearings mainly bear radial and axial combined loads. Bearing bearing capacity depends on the raceway angle of the outer ring.

Cylindrical Roller Bearings

Thrust roller bearings are used to support axial and radial combined loads, mainly axial loads, but the radial load must not exceed 55% of the axial load. Compared with other thrust roller bearings, this type of bearing has a lower friction coefficient, higher speed, and has self-aligning performance.

Self-aligning ball bearings

Spherical roller bearings have double-row rollers, the outer ring has a common spherical raceway, the inner ring has two raceways, and is inclined at an angle relative to the bearing axis. This ingenious structure makes it have self-aligning performance, so it is not easily affected by the angle of the shaft and the bearing box seat to the error or the bending of the shaft. In addition to bearing

Deep groove ball bearings are suitable for high-speed and even very high-speed operation, and are very durable and do not require frequent maintenance. This type of bearing has a small friction coefficient, high limiting speed, and a wide range of sizes and forms. It is used in precision instruments, low-noise motors, automobiles, motorcycles, and general machinery. It mainly bears radial load and